Repiping & Pipe Replacement in Covington, LA

Low pressure? Orange water?

Professional repiping for homes across Covington — serving Old Covington, West 30s & Ozone. Galvanized and polybutylene pipe replacement with PEX or copper, written pricing and a 30-day guarantee.

Request a Quote → (985) 123-4567
Quick answer Low water pressure across the whole house, orange-tinted water at the tap, or leaks showing up in different spots over time usually means the home’s supply piping itself is failing, not any single fixture. In Covington, this most often means galvanized steel pipe past its 40-to-50-year design life, or polybutylene pipe installed between the late 1970s and mid-1990s — both get replaced with PEX or copper rather than repaired piece by piece.

Diagnose It First

What kind of pipe problem do you have?

Match your symptoms and pipe material to what’s actually going on.

Galvanized steel supply lines

Common in homes built before 1990. These corrode from the inside, which is why pressure drops and water discolors gradually rather than failing all at once. Once a section starts corroding, the rest of the line is generally close behind.

Polybutylene supply lines

Grey plastic pipe stamped “PB” or “Quest,” installed roughly between 1978 and 1995. It can crack from the inside with no visible exterior damage, and was eventually phased out of new construction because of that failure pattern.

Isolated pipe damage

A single section damaged by a nail, settling, or a one-time event, in a home whose overall piping is otherwise sound. This is a spot repair situation, not a full repipe.

Watch For

Signs you need a repipe, not a repair

  • Low water pressure across the whole house, not just one fixture
  • Orange or rust-tinted water at the tap
  • Leaks appearing in different spots over time rather than one isolated failure
  • Visible corrosion on exposed pipe sections, such as under a sink
Common question

How do I know if my home has galvanized or polybutylene pipe without cutting into a wall?

A plumber can usually tell from an exposed section — under a sink, in a crawl space, or at the water heater connection — combined with the home’s build year. Galvanized pipe has a dull grey, magnetic surface; polybutylene is a flexible grey plastic often stamped “PB2110” along its length.

Local Factor

Why this happens in Covington

Homes built across the parish before 1990 frequently carry galvanized steel supply lines, many of which are now past their 40-to-50-year functional lifespan. The same construction era in this region, roughly 1978 to 1995, also saw widespread use of polybutylene piping before it was phased out of new construction due to its documented failure rate.

Common question

Is one material worse than the other, galvanized or polybutylene?

They fail differently rather than one being categorically worse. Galvanized pipe gives some warning through gradually dropping pressure and discoloration. Polybutylene tends to fail suddenly, from the inside, with little external warning beforehand — which is part of why it’s treated as a priority replacement even in homes with no current symptoms.

How It Works

Our process

  1. Phone Triage

    Describe the symptoms; confirm your appointment window.

  2. Inspection

    Identify pipe material, age, and extent of the issue at exposed sections.

  3. Written Estimate

    Full or partial repipe cost, in writing, with material choice explained (PEX vs. copper).

  4. Repiping

    Work permitted to St. Tammany Parish code, with before-and-after photos on every job.

  5. Test & Cleanup

    New lines tested before the job is considered complete, work area cleaned.

Written Pricing, No Surprises

What this costs

Service Typical Range
Typical repiping and pipe replacement pricing in Covington, LA
Isolated spot repair$300–$900
Partial repipeQuoted after inspection
Full repipe (PEX or copper)$4,000–$12,000
Final cost depends on home size, number of fixtures, and whether the work requires opening walls versus running lines through existing access points.

FAQ

Questions homeowners ask us

Not usually. Most repipes route new PEX lines through existing access points — attics, crawl spaces, and wall cavities where possible — with only small, targeted openings where a line has to cross into a new area. Those openings are patched as part of the job.
PEX costs less, installs faster since it doesn’t require soldered joints, and handles freeze conditions better. Copper lasts longer overall and some homeowners prefer it for resale value in higher-end homes. For most residential repipes in this area, PEX is the more common and cost-effective choice.
Most single-family home repipes finish in 2 to 4 days depending on size and how accessible the existing lines are. Water service is typically only interrupted for short periods during the actual line swaps, not the entire job duration.

Code-compliant repiping. Honest pricing.

(985) 123-4567 Request a Quote →

Monday–Saturday · 30-day guarantee on every repair · Locally owned in Covington, LA